Industrial Scientific recalls GasBadge Plus single-gas monitors
Vol. 27 Spring 2012
Industrial Scientific Corporation (Oakdale, Pa.) announced a recall of all current GasBadge Plus instruments (v2.2 and earlier; manufactured prior to February 2012) on Jan. 30, saying in its recall notice that it has determined the GasBadge® Plus single-gas instrument "may not properly indicate a low battery condition resulting in a failure to alarm or instrument shut down. This condition is exacerbated when the instrument is used in temperatures below room temperature (72 degrees F/22 degrees C)."
The recall notice is here.
It includes the part numbers for all five types of instruments being recalled -- carbon monoxide, hydrogen sulfide, oxygen, nitrogen dioxide, and sulfur dioxide. No other Industrial Scientific products are affected by this recall, it states.
The notice says the company will exchange all recalled instruments at no charge for new GasBadge Plus v3.0 units that correct the low battery condition problem and will include a warranty covering any remaining warranty period of the recalled instrument.
While some recalled units will give a visual alarm and indicate "Call ISC" on the display when they detect a low battery condition, others may not detect it and may not properly alarm when they detect a gas concentration above the set alarm level, the notice explains.
To contact Industrial Scientific in North America, South America, and Australia, email email@example.com, call 412-788-4353 or 1-800-DETECTS (North America only), or call +03 9644 7777 (Australia and New Zealand). In Europe, the Middle East, or Africa, use the same email address or call +00 800-WORKSAFE (96757233). In the Asia-Pacific region, email firstname.lastname@example.org or call +86 21 5899 3279.