Larson Electronics announced today the release of the EXP-EMG-EXT-12W-1LX Explosion Proof Emergency Exit Sign designed to provide failsafe operation and continued to safety in the event of unexpected power failures. This Class 1 Division 1, Class 2 Division 1 & 2 approved exit sign complies with all safety and hazardous location regulations for emergency explosion proof lighting and will run for the standard 90 minutes when its main power source is unexpectedly shut down.
The EXP-EMG-EXT-12W-11LX explosion proof emergency exit sign from Larson Electronics features an LED powered exit sign and high performance Nickel-Cadmium battery pack to provide operators with a failsafe lighting solution that ideal for hazardous locations where maximum safety and compliance with exit marking standards is required. This emergency backup power equipped exit sign is designed to act as a standard exit indicator in hazardous locations under normal operating conditions, but if power is interrupted, such as during blackouts or plant wide power failures, the unit automatically switches to an internal battery backup system which provides continued operation for up to 90 minutes. The battery backup system on this explosion proof exit sign includes an internal Nickel-Cadmium with a 7 to 10 year operational life and a built in charging system which maintains the battery at a ready state. The fixture is constructed of copper free aluminum for light weight and high durability and has been powder coated to provide resistance to corrosion. The high visibility exit sign is a three sided design that is illuminated by a single 10 watt LED lamp. This LED light has a 50,000 hour operational life and produces more light than a comparable 100 watt incandescent bulb while using only a tenth as much current. This LED lamp also runs much cooler, and can withstand extremes of temperature and impacts and vibrations that would cause ordinary incandescent and fluorescent lamps to fail. The entire housing is IP67 rated waterproof for resistance to wet conditions and designed to be easily mounted to flat surfaces such as walls. This explosion proof light can run from universal voltages ranging from 110 to 277 VAC, making it extremely versatile and easy to install in a variety of locations. This explosion proof exit sign also meets NFPA101 (Life Safety Code), UL844 and UL924 compliance, and is ideal for hazardous locations where operators require the security of fail safe operation combined with the reliability and effectiveness of LED lighting technology.
"During power outages, this explosion proof led light illuminates the light heads and exit sign for 90 minutes, clearly identifying exit locations to all occupants in case of emergency,” said Robert Bresnahan of Larson Electronics LLC Magnalight.com. “The ability to automatically switch from normal power of 120V to 277V AC to battery back-up in hazardous areas during power outages is a design fit for any hazardous location.”
Larson Electronics produces a full range of industrial and commercial lighting equipment, explosion proof work lights, hazardous locations lights, intrinsically safe lighting, and LED work lights. To view the entire Larson Electronics line of industrial grade lighting solutions, visit them on the web at Larsonelectronics.com. You can also call 1-800-369-6671 to learn more about all of Larson Electronics’ lighting products or call 1-214-616-6180 for international inquires.